產品詳情
3U-SZC系列失重秤
3U-SZC series of weightlessness scale
一、產品概述product introduction
失重秤采用靜態計量結構、周期循環控制方式，具有極高的計量精度，廣泛應用于玻璃、建材、水泥、塑料、冶煉、礦山、化工等行業。
Weightlessness scale using the static measurement structure, cycle control mode, the measurement accuracy is high, widely used in building material, glass, cement, plastic, bllurgy, mine, chemical industry etc..
二、工作原理Work principle
失重秤采用周期計量控制方式，設置好周期時間和周期重量，在周期內，首先通過上給料機向計量料斗進料，當進料大于設定重量時，停止進料，微機記錄下現在的重量值，然后控制下給料機開始排料，當排料量接近設定重量時，改為慢速排料方式，直到等于設定重量，停止下給料機排料，等待周期結束后，進入下一個周期循環運行，因為計量時處于靜態計量方式，所以有極高的計量精度。
Weightlessness scale using periodic measurement control mode, set up the cycle time and cycle of weight in the period, first through the feeder to the metering hopper feed, when the material is greater than the set weight, stop feeding, microcomputer recording now under the weight value, and then under the control of feeder began to discharge, when discharging quantity of close set the weight, to slow the discharging b, until it is equal to the set weight, stop feeder discharge, waiting for the end of cycle, into the next cycle of operation, as measured in static measurement mode, so the measurement precision.
三、技術指標Technical indicators
計量精度Measurement precision：≤ ±0.5%
產量范圍Capacity range：0.01－60T/H
計量方式Metering mode：靜態Static
工作方式Working mode：斷續或批次Intermittent or batches
四、系統特點System features
1、計量精度高，系統計量精度可達到0.5%。High measuring accuracy, the system measuring accuracy can reach 0.5%
2、密封效果好，給料機和計量料斗采用密封結構，很容易的實現密封結構Good sealing effect, feeder and hopper adopts sealing structure, easy to achieve sealing structure
3、標定簡單，采用簡單的砝碼標定，即可達到很高的計量精度。Calibration is simple, the simple weight calibration, can achieve very high metering accuracy.
4運行穩定可靠，采用周期測零技術，徹底解決了稱重信號的溫漂和時漂，保證了長期計量精度。Stable and reliable operation, using periodic zero detection technology, compleby solve the weighing signal temperature drift and time drift, ensure a long measurement precision.
5、采用高精度的數字稱重模塊，數字傳輸技術，具有線路簡單、無調節部件、分辨率高、信號無衰減、抗干擾強。
By using high precision digital weighing module, digital transmission technology, has the advantages of simple circuit, no adjustment parts, high resolution, no signal attenuation, no interference.
6、控制器采用觸摸顯示技術，中英文圖形化顯示，向?qū)Р僮鞣绞?，操作簡單，無需記憶。
The controller uses touch display technology，Chinese- English graphical display, guide mode of operation, operation simple, without memory.
7、可接485通訊，CAN通訊，DCS,PLC等接口。
It can connect 485 communications; CAN communication, DCS, PLC etc. interface.
8、采用GPRS無線數傳功能，可以短信報表、遠程診斷、校秤等功能。
Using the GPRS wireless data transmission function, can SMS report, remote diagnosis, remote control scales and other functions.
